Since the trial operation site has received a lot of friends for advice – how to maintain mechanical watches? I summed up the ten personal experience: high-end watches recommended every 1-2 years should do the appropriate maintenance, replacement of waterproofing components, detection performance and movement when power walking, cleaning and conservation movement, appearance, etc. This maintenance service will effectively extend your use of mechanical time.
(1) wear watches, the hands sweat on the case of corrosive, steel case because it is nickel-chromium alloy, better corrosion resistance, copper semi-steel case, long-term contacts with sweat, easy corrosion, should be often with a soft cloth wipe sweat or plastic table mat care to prevent erosion of its sweat.
(2) Table Mongolia renovation. Mongolian watch a lot of road pattern was set aside after the first drop in 12 drops of the table covered with water, then squeeze a little toothpaste obliterated, you can draw lines removed leaving the watch-glass as new.
(3) Do not watch on the amplifier, stereo, TV, in order to avoid magnetization.
(4) long-term storage does not wear a watch, should be a regular monthly winding, automatic movement of the watch gently back and forth should be worn on the wrist a few minutes or a period of time to self-tight winding. The parts will not be long at rest, in order to ensure the functioning of the printer performance.
(5) Do not open the table cover, so as not to affect the movement of dust into the watch work.
(6) Do not have a watch on the wardrobe mothballs, so as not to form the oil deterioration.

(7) receipt of a beloved watch, removed the outside packaging, be sure to save a good protective packaging used to watch. These protect the watch box, can not usually wear the watch to give the most secure protection against the watch is broken or crashed, so keep the box is absolutely necessary, but recommended not to wear watches on weekdays, the support into the habit into the box, you can greatly reduce the chance of damage to the watch.
(8) usually best not to wear the same watches every day, should be more prepared to watch several different alternate use, in addition to extensive personal style, but also to avoid dust, dirt entirely on the same body just watch. For the leather strap, but also to be treated with care, so as not to use every day wear and tear caused by the recurrent pulling strap, even if the surface of the new new watches also look very old.
(9) to sleep on the watch worn on the wrist, if the watch is luminous watch, it will adversely affect the body. This is because the luminous watch dial pointer and coated on the light-emitting materials, mainly a mixture of radium and zinc sulfide, radium rays can stimulate the release of the zinc sulfide crystal light, sleep, and if wearing a sheet, the body would be eight to nine hours of radium radiation on the human body has certain hazards. Therefore, before going to sleep, it is best to take down the luminous watch, on the table.

(10) General mechanical watch by the tide, use a dry cotton on the pressure in the watch, 40-watt light bulb and then bake for 5 minutes, all exterior and interior moisture can evaporate out. If the quartz electronic watches by the tide, it is desirable small number of calcium chloride, with a gauze wrap; and then open the e-table cover, the packaged electronic form together with calcium chloride and left out of the gas into the plastic bag or glass bottle, sealed. About 3 hours to the general trend in addition, the spreadsheet back to normal. For the serious moisture moisture absorption time may be extended table.